Rosewill RX25-AT-SC-BLK/SLV - Manual (Page 2)

2.5” SATA TO USB External Enclosure RX25-AT-SC-BLK/SLV User Manual
5
Hardware Installation Guide
☆ Please follow the instructions and make sure your hard drive is successfully installed to
the external enclosure!
STEP1 :
Release the 2 screws then pull out the rear panel and tray.
STEP2 :
Place the HDD into the tray.
Push the HDD to connect the SATA connector.
Note: Make sure all connectors are connected well.
STEP3:
Screw the HDD on the tray tightly.