Roberts Radio Multi-Powered 2 Band Radio R9957 - Manual (Page 7)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Charging your radio
Your radio can be powered by winding the dynamo handle which
charges an internal rechargeable battery, by using ordinary
alkaline batteries or by using an adaptor. (not supplied)
Using Dynamo power
1. Ensure the telescopic aerial is in the rest position before
winding the dynamo handle.
2. Take out the Dynamo power handle from its rest posi-
tion.
3. Wind the Dynamo handle either clockwise or anti-clockwise
until the charging LED indicator is illuminated. Winding the
radio for 1 minute will give around 30 minutes charge.
4. Ensure the handle is placed back in the rest position once
charged.
Note: The dynamo will not operate if an AC adpator is con-
nected to the radio.
6
3
3