Features and benefits, Package contents, System requirements – Rosewill RC-301E User Manual
Page 2: Hardware installation, Driver installation
2 ports Serial PCIe Card
RC301-E User Manual
3
Features and Benefits
z Compliant with PCI Express Base Specification 1.0a
z Supports 2 x UART serial port
z Build in 16C550 compatible UART with 16 byte transmit-receive FIFO
z Data transfer rate up to 115200bps
z PCI-Express X1
z 2 x 9 pins serial connectors
Package Contents
z PCIe Serial Card 2 Ports
z Driver CD
z User Manual
System Requirements
z Windows® 2000/XP/Server 2003
z PCI Express-enabled system with an available PCI Express slot
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the
board down firmly.
5.
Connect the system power source to the board’s power connector.
6.
Replace the slot bracket’s holding screw to secure the card.
7.
Replace the computer cover and reconnect the power cord.
Driver Installation
Please make sure the board is installed before proceeding with driver installation.
For Windows® 2000
1.
At the Found New Hardware Wizard, click Next.
2.
Select Search for a suitable driver for my device(recommended), and click Next.