Loose parts, Tools needed – Ryobi SC180VS User Manual
Page 8
Advertising
Page 8
LOOSE PARTS
Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.
■ Blade(s)
■ Operator's Manual (not shown)
The following tools (not included) are needed for adjustments and alignment:
■ Combination Square
■ Phillips Screwdriver
■ Slotted Screwdriver
SMALL
COMBINATION
SQUARE
PHILLIPS SCREWDRIVER
Fig. 3
SLOTTED SCREWDRIVER
TOOLS NEEDED
Fig. 2
PLAIN BLADE
ADJUSTABLE WRENCH
HEX KEY
PIN BLADE
■ Hex Key
■ Adjustable Wrench
Advertising