Radio Shack Pro-97 1,000 - Manual (Page 74)

74
Beyond the Basics
When you try to store more than 150 talk group IDs in a
bank, Memory Full! appears. Clear some talk group IDs in
order to store new ones (see “Clearing Talk Group IDs”).
Follow these steps to manually store talk group IDs or to edit
a stored ID.
1. Press PGM.
2. Press TRUNK.
3. To select the bank where you want to store the ID,
repeatedly press FUNC then e or d until you reach the
desired bank.
4. Press MODE to select MOT, ED, or LTR.
5. Repeatedly press TRUNK to select the sub-bank.
6. Press e or d to select the location where you desire to
store the ID number.
7. Enter the talk group ID and press ENT. If necessary, use the
decimal point for a hyphen.
8. If you want to tag the ID, press TEXT, enter the desired text
tag for the ID. Then press ENT (see “Text Input Chart”).
Notes Notes