RCA Satellite TV System - Manual (Page 34)

Satellite Receiver Features
32 Chapter 3
Tip
For information on tuning to a PPV
program, see page 45.
Tuning to a Program
To tune directly to a current program listed in the guide, point to the program
and press OK.
To see information about a program in the guide, point to the program and
press INFO.
Then, you can select:
• View Channel to tune to that channel
• Remind Me to set up a Watch Timer. This will display a prompt allowing you
to quickly change the channel when the program is about to begin.
• Other Times to see what other times the program is available.
• More Details opens another display with detailed information (if available).
The options available to you may vary according to the type of program you
select.
More Details
There’s a variety of program information sent along with standard broadcast
signals, and your digital satellite receiver can display much of it (if available).
The More Details menu can offer information (if available) about Actors and
Roles, the Director, the Writer, Original Materials, the Production Studio,
Awards, Keywords associated with the program, and the original release Date
and Run Length. Just use the remote control’s arrow and OK buttons to
highlight and select the desired button, and to display more information.
You can even use the displayed information in the More Details menu to look
for matching information in the stored guide programs, or to create search
criteria for use with the Scout™ search feature of your digital satellite receiver.
To Access More Details:
1. Highlight a desired program in the on-screen guide and press the remote
control’s INFO button.
2. Highlight and select More Details.
Note: The More Details button is displayed in the Program Details menu
only if more information is available.
3. Highlight and select the desired on-screen information button to display the
details on the opposite side of the screen.
To search for other programs with similar information:
4. Highlight the desired information on the right side of the menu and press
the remote control’s OK button. This will display any other program stored
in the on-screen guides that shares the highlighted information.
To save your search as Scout Criteria:
5. After completing step 4, use the remote control’s arrow and OK buttons to
select the Save as Scout button. You will be given on-screen instructions to
complete this task.
Tip
Your digital satellite receiver can
store up to three days of information,
so retrieving data can take a little
time.
It can take up to 6 hours to download
all three days of information when
turning the system on after the Guide
information has been lost.