RCA 25250 - Manual (Page 22)

22
Set Work Hours
This will allow you to program the start time for the working hour.
From the Answering System Menu:
1. Press the
VOL (- or +) button to scroll to the Set Work Hours.
2. Press SELECT soft key.
3. Use the touch-tone pad to set the time, and use AM/PM soft key to
select AM or PM.
4. Press the SELECT soft key to save the time.
5. Use the
VOL (- or +) button to select Yes or No for Announce Only.
6. Press the SELECT soft key to save your selection and “Saved” shows in
the display.
NOTE: If you select Yes for Announce Only, the unit will hang up the call after
announcing the greeting when answering the call is in answering mode.
Set After Hours
This will allow you to program the start time for the after work hour.
From the Answering System Menu:
1. Press the
VOL (- or +) button to scroll to the Set After Hours.
2. Press SELECT soft key.
3. Use the touch-tone pad to set the time, and use AM/PM soft key to
select AM or PM.
4. Press the SELECT soft key to save the time.
5. Use the
VOL (- or +) button to select Yes or No for Announce Only.
6. Press the SELECT soft key to save your selection and “Saved” shows in
the display.
NOTE: If you select Yes for Announce Only, the unit will hang up the call after
announcing the greeting when answering the call is in answering mode.
Example:
a) Set the Work Hours start at 9:00am, and “Announce Only” as NO.
b) Set the After Hours start at 5:00pm, and “Announce Only” as NO.
c) Select “Timed” while setting the OGA.
When the call comes in within 9:00am to 5:00pm, the Work Hours OGA
will be announced to the caller.
When the call comes in after 5:00pm up to 9:00am, the After Hours
OGA will be announced to the caller.
On Saturdays and Sundays, the unit will announce After Hours OGA.
Programming the Telephone