Roberts Radio RC9907 - Manual (Page 4)

Battery operation
IMPORTANT - The LR6 (AA size battery) must be fitted at all times to
provide power for the clock.
1. Remove the Battery cover on the rear of the unit by pushing the
catches in the direction of the arrow.
2. Insert one LR6 (AA size) battery into the small space in the battery
compartment. The clock display will now appear. The LR6 (AA size)
battery provides power for the clock and must remain fitted
at all times.
3. Insert four LR14 (C size) batteries into the remaining spaces in the
battery compartment. Take care to ensure all batteries are inserted
with the correct polarity as shown inside the battery compartment.
Replace the battery cover.
4. Reduced power, distortion, and a ‘stuttering’ sound are all signs that
the batteries may need replacing.
5. If your radio cassette is not to be used for any extended period of
time it is recommended that the batteries are removed from the radio.
We would recommend for economy, that the RC9907 is used on the
mains whenever possible with battery operation for occasional or
stand-by use only.
IMPORTANT: The batteries should not be exposed to excessive
heat such as sunshine, fire or the like. After use, disposable
batteries should if possible be taken to a suitable recycling centre.
On no account should batteries be disposed of by incineration.
Mains operation
1. Place your radio cassette on a flat surface.
2. Plug the mains lead into the Mains socket located on the rear of your
radio cassette ensuring that the plug is pushed fully into the socket.
3. Plug the other end into a wall socket and switch on. The Mains
indicator will light up indicating that the radio is connected to the
mains supply. The batteries will be automatically disconnected.
3
1 1
RC9907 Issue 3.pmd 1/26/2007, 1:35 PM 4