Runco Video Xtreme VX-6000d - Manual (Page 48)

Installation
36 Runco VX-6000d Owner’s Operating Manual
PRE
L
IMINAR
Y
RS-232 Controller
Connection
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation
system (if present) to the RS-232 Control port on the DHD Controller; see Figure 3-13.
For more information about using this connection, refer to Serial Communications on
page 79.
Figure 3-13. RS-232 Control System Connection
➤
Pb Pr Y
Video
3 IR
RS-232 Control
S-Video 1
S-Video 2
1 2
TRIGGERS
RS-232 Out Component Video
1 2 3 4 5
7 8 9 6
to Automation/
Control System
or PC
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)