Led activities description, Camera hardware installation – Rosewill RXS-3211 User Manual
Page 4
Wired Internet Camera
RXS-3211 Quick Installation Guide
Stand Connector: Connects to any standard tripod / camera wall holder.
WPS / Reset Button: Press and release this button to activate WPS mode
(WPS mode is not available in Wired Camera); press and hold this button for
10 seconds to clear all settings of this camera and return to factory default.
Power Jack: Connect to 5V power adapter.
LAN Jack: Connect to LAN by Ethernet cable.
LED Activities Description
LED Name
Status
Description
Slow Blinking
Camera is booting
Steady On
Camera is correctly powered
Blue
Off
Camera is off
On
Camera is correctly powered
Off
Camera is not connected to LAN
Green
Flash
Camera is logged in
Camera Hardware Installation
Please follow the following instructions to set your IP camera up.
1. Unpack the product package and check if anything missing.
2. Insert supplied LAN cable to “LAN” jack. You can choose to plug the other
end onto one of the following: your computer, and your wired or wireless
router.
3