Reebok Fitness RT300 RBEX2976.3 - Manual (Page 5)

5
M4 x 19mm
Screw (33)–2
M10 x 85mm Button
Screw (56)–4
M10 Nylon
Locknut (48)–2
M10 Split
Washer (63)–3
Black M10 Curved
Washer (61)–2
M10 Curved
Washer (36)–2
Black M10 x 50mm Button
Screw (64)–2
M10 x 50mm Button
Screw (46)–3
M4 x 16mm
Screw (58)–4
M6 x 10mm
Screw (60)–2
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
tools, assembly requires a Phillips screwdriver , an adjustable wrench , and
a rubber mallet .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been pre-assembled.