RCA ViSYS 25110 - Manual (Page 31)

1
Headset and Belt Clip Operation
Connecting an Optional Headset to the Handset
1. Connect the headset (optional) to the HEADSET jack as shown. The handset
receiver and microphone are disabled when the headset is connected.
TIP: To order a headset, please refer to the accessory order form at the end of this user’s guide.
2. Adjust the headset to rest comfortably on top of your head and over your ear.
Move the microphone to approximately 2 to 3 inches from your mouth.
3. Press the Talk button to answer or place a call.
4. To return to normal operation, unplug the headset from the jack.
Attaching the Belt Clip
1. Insert the sides of the belt clip into the slots on each side of the handset.
2. Snap the ends of the belt clip into place.
Other Information
headset jack