RAD Data comm BR-ASI01 - Manual (Page 8)

8
RouterView Software Installation
If you plan to use RouterView, DCB’ GUI (Graphical User Interface) management
software which is included with your router, then read this section. Instructions are
provided on how to install RouterView for Windows or Macintosh environments.
Command Line Preparation
If you have decided to use command line management, either out-of-band (through
the AUX port), or in-band through Telnet, read this section.
Quickstart Configuration
The Quickstart section provides a list of parameters that must be entered into a
router for proper operation.
Appendices and Index
Additional information that might be of interest to you such as technical
specifications and a quick reference to specific information can be found at the end
of this guide.