RCA CC634 - Manual (Page 13)

11
Powering Your Camcorder
Attach Adapter/Charger
1. Plug power connector’s plug into DC
OUT jack on adapter/charger.
2. Align the reference mark on the power
connector with the mark on the
camcorder. Hold the top of the power
connector flush against the back of the
camcorder, and press the bottom of
the power connector onto the
camcorder until it locks into place.
3. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60Hz).
4. If the adapter/charger is properly
connected, its POWER indicator will
light.
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Press and hold BATT. RELEASE on
the camcorder while removing the
power connector.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the
AC outlet.
AC Plug
Optional AC
Plug Adapter
AC 100-240V
BATT. RELEASE
B C
AUDIO
RF
DC OUT
VIDEO
LE N S C O V E R + –
POWER
CHG END REFRESH
CAMERA
VCR
POWER
OFF
DC OUT Jack
POWER
Indicator
Power Connector
To AC 100-240V,
50/60 Hz
BATT. RELEASE Button
Caution: Do not use this
adapter/charger for any other purpose
other than charging the FB1260 or
FB120 battery pack or supplying
power to the camcorder.
Using the Adapter/Charger to Power Your Camcorder
The power connector attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.