Ricoh Broadband. Digital TV. Phone. - Manual (Page 9)

6
Programming Your Universal Remote
The Universal Remote Control can be programmed
to operate other devices such as your TV, DVD,
Home Theater System, or VCR.
1. Refer to the code tables at the end of
this guide (pg. 38) for the codes needed
to program your remote.
2. Turn on the device that you want to
assign to a mode key.
3. Press and hold the appropriate mode
key (TV, DVD, or AUX) on the remote,
then press and hold the OK key.
4. Release both keys and the mode keys
will flash twice.
5. Enter the first 4-digit setup code for device
using the number keys (0-9) on the remote.
The mode key will flash three times to
indicate that the code entry was accepted.
* When an invalid code is entered, the
selected mode key will display a long
flash to indicate that you have not
entered the code correctly.
* If the remote times-out before you
complete the code setup, you will
need to start over. This is indicated
by one long flash of the red LED.