Roland XP-80 User Manual
Page 32
32
Save your song to disk
You can save your song to the disk you just formatted.
<Procedure>
❶
Make sure that the Disk Menu display (DISK/Menu) is up.
If another display is showing, press [DISK] to call up the Disk Menu display.
❷
Press the numeric key [2], then [ENTER].
The Save display (DISK/Save) will appear.
❸
Make sure that SONG is selected for “File Type.”
❹
Press [r] to move the cursor to “Save Mode,” and make sure that “SONG + SOUND” is select-
ed.
This allows you to save the Performance settings to disk along with the song.
❺
Press [d] to move the cursor to “File Name.”
❻
Press [l] or [r] to move the cursor to the location where you wish to enter a character.
Modify the temporary file name “SONG_000” and assign a new file name as you like.
❼
Turn the VALUE dial, or press [INC]/[DEC] to select the desired character.
❽
Repeat steps 6 and 7 to finish assigning the new file name.
❾
Press [F6] (Execute) to save the file to the disk.
When saving is completed, the display indicates “COMPLETE.”