Package contents, Connecting the router, 1 system requirements – Rosewill RNX-N150RT User Manual

Page 2: 2 installation environment requirements, 3 connecting the router

Advertising
background image

1

1. Package Contents

The following items should be found in your package:

z

RNX-N150RT 150Mbps Wireless Lite N Router

z

Power Adapter for RNX-N150RT 150Mbps Wireless Lite N Router

z

Quick Installation Guide

z

Resource CD for RNX-N150RT 150Mbps Wireless Lite N Router, including:

¾

This

Guide

¾

Other

Helpful

Information

)

Note:

Make sure that the package contains the above items. If any of the listed items are
damaged or missing, please contact with your distributor.

2. Connecting the Router

2.1 System Requirements

¾

Broadband Internet Access Service (DSL/Cable/Ethernet)

¾

One DSL/Cable Modem that has an RJ45 connector (which is not necessary if

the Router is connected directly to the Ethernet.)

¾

PCs with a working Ethernet Adapter and an Ethernet cable with RJ45

connectors

¾

TCP/IP protocol on each PC with no conflict

¾

Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari

2.2 Installation Environment Requirements

¾

Place the Router in a well ventilated place far from any heater or heating vent

¾

Avoid direct irradiation of any strong light (such as sunlight)

¾

Keep at least 2 inches (5 cm) of clear space around the Router

¾

Operating Temperature: 0℃~40℃ (32℉~104℉)

¾

Operating Humidity: 10%~90%RH, Non-condensing

2.3 Connecting the Router

Before installing the Router, make sure your PC is connected to the Internet through
the broadband service successfully. If there is any problem, please contact your ISP.
After that, please install the Router according to the following steps. Don't forget to
pull out the power plug and keep your hands dry.

7109504058_RNX-N150RT_QIG_REV1.0.0.pdf 2

2010-12-22 15:04:42

Advertising