Specifications – Roland MMP-2 User Manual

Page 53

Advertising
background image

53

Specifications

Analog Input

Connector:

XLR-3-31 type (balanced)
1/4 inch TRS phone type (balanced)

Input Impedance:

40k

Phantom Power:

DC 48 V and 7m A when the output is shorted

PAD:

20 dB pad

Maximum Input Level:

+ 2 dBu (PAD off)
+22 dBu (PAD on)

Nominal Input Level:

-64 dBu – +4 dBu

Equivalent Input Noise:

-132 dBu (IHF-A typ.)

Analog Output

Connector:

XLR-3-32 type (balanced)

Output Impedance:

600

Recommended Load Impedance:

1k

or greater

Nominal Output Level:

-16 dBu / +4 dBu

Signal-to-Noise Ratio:

105 dB typ.

Digital Input

Connector: RCA for S/PDIF
Impedance: 75

Digital Output

Connector: XLR for AES/EBU, RCA for S/PDIF
Impedance: 110

for AES/EBU, 75

for S/PDIF

Signal Processing

A/D Conversion: 24-bit, 64 times oversampling
D/A Conversion: 24-bit, 128 times oversampling

Sample Rate

96.0kHz, 88.2k Hz, 48.0k Hz, 44.1k Hz

Frequency Response

96.0k Hz: 20 Hz – 40k Hz (+0.1 / -3.0 dB)
88.2k Hz: 20 Hz – 40k Hz (+0.1 / -3.0 dB)
48.0k Hz: 20 Hz – 20k Hz (+0.1 / -0.5 dB)
44.1k Hz: 20 Hz – 20k Hz (+0.1 / -0.5 dB)

Microphone Modeling

Reference Microphone:

DR-20, Small Dynamic Microphone,
Head-worn Dynamic Microphone,
Miniature Condenser Microphone, AKG C3000B, Flat

Modeling Microphone:

Small Dynamic, Vocal Dynamic, Large Dynamic,
Small Condenser, Large Condenser,
Vintage Condenser, Flat

Equalizer

4-Band parametric equalizer
Reference Frequency: 20 Hz – 20k Hz
Type:

Peaking, Low-Shelving, High-Shelving, Low-Pass,
High-Pass, Low-Pass2, Hi-Pass2, Band-Pass,
Band-Eliminate

GAIN: -15 dB – +15 dB

Compressor

Type: Solid, Tube1, Tube2, Tube3, Tube4
Knee Type: Hard or Soft knee

Other Effects

Expander, Enhancer, De-esser, Pre-amp Modeling

Display

20 characters, 2 lines (back light LCD)

Power Supply

AC 117 V, AC 230 V or AC 240 V

Power Consumption

9 W

Dimension

250 (W) x 165 (D) x 76 (H) mm
9-7/8 (W) x 6-1/2 (D) x 3 (H) inches

Weight

1.8 kg
4 lbs

Accessories

Owner’s Manual, CD-ROM, AC Cord, USB Cable

(0 dBu = 0.775 Vrms)
* In the interest of product improvement, the specifications and/or

appearance of this unit are subject to change without prior notice.

Advertising