Ryobi 4730301 - Manual (Page 3)

3
SYMBOLS
SAVE THESE INSTRUCTIONS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations
with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious
injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or seri-
ous injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moder-
ate injury. It may also be used to alert against unsafe practices that may cause property damage.
Advises you of additional information concerning the operation or maintenance of the equipment.
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information.
• Do not expose to rain or use in damp locations.
• Failure to keep your hands away from the blade
will result in serious personal injury.
• To reduce the risk of injury, the user must read and
understand the operator’s manual before using this product.
• Always wear safety goggles or safety glasses with side
shields and a full face shield when operating this product.
SYMBOL NAME
Wet Condition Alert
No Hands Symbol
Read the Operator’s Manual
Eye Protection
MEANING
Note:
UNPACKING
Your new Wide Table Kit includes two 41 in. extension rails,
plus the necessary brackets and connecting hardware required
to make one wide support base and a rear extension table
for your BT3100/BT3100-1 table saw. All you have to supply
is the lumber required for table tops and table legs, plus the
wood screws, nails, bolts, etc. required to secure the table
legs to the table top.

Remove the parts from the box. Make sure that all items
listed in the loose parts list are included.
WARNING:
If any parts are missing do not assemble the kit until the
missing parts are replaced. Failure to do so could result
in serious personal injury
 Inspect all parts carefully to make sure no breakage or
damage occured during shipping.
 If any parts are damaged or missing, please call 1-800-
525-2579 for assistance.