Radio Shack PRO-76 - Manual (Page 24)

24
6. Press ▼ to search from
the upper to the lower
limit or
▲ to search from
the lower to the upper
limit. The current monitor
memory number flashes.
7. When the scanner stops
on a transmission you
want to save, press
MON
to store the frequency in
the current monitor
memory. The monitor
memory number stops
flashing.
8. Press either ▼ or ▲ to
continue the search. If
you saved a frequency
in a monitor memory, the
monitor memory num-
ber advances by one
and starts flashing
again. (If the last monitor
memory was 10, the
scanner returns to moni-
tor memory 1.)
Note: To replace a fre-
quency in a monitor
memory, store a new
frequency in that monitor
memory.
9. To hold the frequency,
press HOLD . H appears.
To resume the limit
search, press
HOLD
again.
Notes:
• You can press ▼ ▼ ▼ ▼ or ▲ ▲ ▲ ▲
while H appears to step
through the frequencies
toward the upper or
lower limit.
• If you tune to a search
skip frequency, L/O
appears (see “Using
Search Skip Memory” on
Page 30).
Using Direct Search
During a direct search, the
scanner searches up or
down starting from the dis-
played frequency.
d appears
during a direct search.
Follow these steps to use di-
rect search.
Note: You can use the scan-
ner’s delay feature while us-
ing direct search.
1. Press MANUAL then use
the number keys and •
to enter the starting fre-
quency of the range you
want to search.
Or, to select a frequency
stored in a channel,
press
MANUAL , use the
number keys to enter
the channel number,
20-313.fm Page 24 Friday, January 7, 2000 3:09 PM