Radio Shack 63-5026 - Manual (Page 2)

08A02
63-5026
Printed in China
&C[NKIJV"5CXKPI"/QFG
1. In the World Time mode, hold down
SET/SEL for about three seconds. The
city code flashes.
When the city code flashes, repeatedly
press
REV to turn on or off the daylight
saving mode. :IJ :IJ :IJ :IJ appears when the
daylight saving mode is turned on,
Repeatedly press
FWD to select the
desired city code within the same time
zone.
2. Repeatedly press SET/SEL to select
seconds, hour, minute, year, month,
date.
3. Repeatedly press or hold down FWD or
REV to set the desired digits.
4. Press MODE to confirm setting.
5EJGFWNG"/QFG
1. Repeatedly press MODE until
I9>;:KB; I9>;:KB; I9>;:KB; I9>;:KB;
,
then ;CFJOéý ;CFJOéý ;CFJOéý ;CFJOéý appears.
2. Press SET/SEL .
I9>;:KB;5 I9>;:KB;5 I9>;:KB;5 I9>;:KB;5
appears and
the year digits flash.
3. Repeatedly press SET/SEL to select
year, month, date, hour and minute.
4. Repeatedly press or hold down FWD or
REV to set the desired digit(s).
5. Press MODE to confirm.
C;II7=;5 C;II7=;5 C;II7=;5 C;II7=;5
appears.
6. Input the characters by pressing FWD ,
REV, or the corresponding character to
select the character. Press SET/SEL to
move the cursor. ± ± ± ±
7. Press MODE to store the message.
CI= CI= CI= CI= appears on the top line of the display on
the schedule date. At the scheduled time,
the schedule time and message appear to
remind you of your appointment. To return to
the normal display, repeatedly press
MODE .
To review the schedule , repeatedly press
FWD or REV in schedule mode.
d
appears
to indicate you are in schedule mode.
To edit the message , repeatedly press FWD
or REV to locate the message you want to
edit. Repeatedly press SET/SEL until
;:?J5 ;:?J5 ;:?J5 ;:?J5
appears. Press FWD , then repeat steps 3 – 7
to edit the message.
To delete the message , repeatedly press
SET/SEL until
:;B;J;5 :;B;J;5 :;B;J;5 :;B;J;5
appears. Press FWD .
O%D5 O%D5 O%D5 O%D5 appears. Press FWD again to confirm
the deletion.
To add a new message , repeatedly press
SET/SEL until
D;M5 D;M5 D;M5 D;M5
appears. Press FWD ,
then repeat steps3 – 7 to add new message.
6GNG//GOQ"/QFG
1. Repeatedly press MODE until
J;B;#C;CE J;B;#C;CE J;B;#C;CE J;B;#C;CE , then ý;CFJOé ý;CFJOé ý;CFJOé ý;CFJOé appears.
2. Press SET/SEL .
C;CE5 C;CE5 C;CE5 C;CE5
appears.
3. To input the data, press FWD , REV , or
the corresponding key to enter a
character. Press
SET/SEL to move the
cursor.
4. Press MODE to store the memo. :7J75 :7J75 :7J75 :7J75
appears.
5. To input the phone number, press FWD ,
REV, or the corresponding key to select
the number. Press SET/SEL to move the
cursor.
6. Press MODE to store the data.
To review the tele-memo , repeatedly press
FWD or REV in tele-memo mode.
e
appears to indicate you are in tele-memo
mode.
To edit the tele-memo , repeatedly press
FWD or REV to locate the memo you want to
edit. Repeatedly press SET/SEL until
;:?J5 ;:?J5 ;:?J5 ;:?J5
appears. Press FWD , then repeat steps 3 – 6
to edit the tele-memo.
To delete the tele-memo , repeatedly press
SET/SEL until
:;B;J;5 :;B;J;5 :;B;J;5 :;B;J;5
appears. Press FWD ,
O%D5 O%D5 O%D5 O%D5 appears. Press FWD again to confirm
the deletion.
To add a new tele-memo , repeatedly press
SET/SEL until
D;M5 D;M5 D;M5 D;M5
appears. Press FWD ,
then repeat steps 3 – 6 to add new tele-
memo.
%CNEWNCVQT"/QFG
1. Repeatedly press MODE until 97B9 97B9 97B9 97B9 and &&&&
appear.
2. Press numerical keypad for calculation
operation. ± ± ± ±
Press SET/SEL anytime to reset to
&&&&
.
4GRNCEKPI"VJG"$CVVGT[
The watch comes with one CR 2025 type
lithium button-cell battery for power. When
the screen looks dim or the sound becomes
weak, replace the battery.
RRRR
. ± ± ± ±
1. Use a small Phillips screwdriver (not
supplied) to remove the four screws
from the watch’s back cover, then
remove the cover.
2. Remove the plastic insulation slip, and
then use the Phillips screwdriver to
remove the two screws from the battery
cap, then remove the cap.
3. Remove the old battery and install the
new one, positive (+) side facing up.
4. Replace the plastic insulation slip. Make
certain that the two springs are inserted
through the holes of the slip.
5. After securing the battery cap with its
screws, replace the cover and secure it
with its screws.
± "016'" ± "
Schedule Mode
• The maximum number of characters that can
be entered for the name or the number is 20.
• Schedule and tele-memo will share the
same data base. The memory can store up
to 100 entries, unless the names and
numbers are excessively long (names over
six characters, or numbers over 10 digits).
• The symbols “ [ , ] , +, Ч , ч and = ” cannot be
selected when inputting alpha characters.
The letters “A – Z” and symbols “/,
• , =, : , +”
cannot be selected when inputting the
numeric characters of a telephone number.
• On the scheduled date, the schedule is
retrieved and displayed for about three
seconds every two hours after 12:00 AM .
• The
ээээ
schedule is deleted automatically when
the date has passed.
Calculator Mode
• If you enter any incorrect function key (+, -,
x, or ÷ ), simply press the correct function key
and continue.
• The calculation result cannot exceed eight
digits to the left of the decimal point.
Replacing the Battery
• For the best performance and longest life,
we recommended a RadioShack lithium
battery.
• To avoid data loss, complete the battery
replacement within one minute, and do not
press any button during the exchange. If the
battery is removed for longer than one
minute, or if any button is pressed during the
exchange, all datum are reset to the original
factory settings.
R
"9#40+0)"
R
• Keep button-cell batteries away from
children. Swallowing a button-cell battery
can be fatal.
• Dispose of old batteries promptly and
properly. Do not burn or bury them.
.
"%#76+10"
.
Use only a fresh battery of the required size
and recommended type.