Riccar RC-1500P - Manual (Page 12)

12
■ Please check each item below if you have trouble with your cleaner.
Before checking, ensure that the cleaner is unplugged from the power supply.
BEFORE ASKING FOR SERVICE
Problem
• Suction power is weak.
• The cleaner does not work.
• Power cord does not rewind.
• Power cord won't pull out of
the cleaner.
Check Point
• Dust bag
• Wand or hose
• Is the hose adapter inserted
into the suction opening of the
cleaner completely ?
• When the dust bag is full or
blocked or any of the
accessories are blocked, the
over-heating protection for the
motor is activated.
• Power cord
• Power cord
Note
• If dust bag is full, replace it.
• If clogged or blocked, remove
the object.
• Insert it completely.
• Switch off and unplug the
cleaner and check the dust
bag and accessories and
remove any blockages. The
cleaner can be switched on
again after approximately 20
minutes.
• Pull the power cord out a little
and press the cord rewind
button.
• Do not pull it by force. Rewind
it a little by pressing the cord
rewind button and pull it out
• Specifications can be changed for improvement without notice.
Model
Rating
Ampere
Weights(Net)
Dimension (L X W X H)
Cord Length
RC-1500P
120V/60Hz
9.5A / 12A (with Power Nozzle)
15.5 Pounds
19" x 12.5" x 9.3"
19.5 feet
SPECIFICATIONS