Roberts Gorden CoRayVac CRV-B-9 - Manual (Page 32)

CRV-S ERIES I NSTALLATION , O PERATION AND S ERVICE M ANUAL
26
Step 8.6.3 Reflector Side Extension Installation for Decorative Grilles
8.7 One-Foot Decorative Grille Installation
Step 8.7.1 One-Foot Decorative Grille Bracket
Reflector Side Extension
Cut relief notches for tube
and reflector hangers.
A
NOTE: If the decorative grille system is to be installed in an area with
considerable air movement, it is recommended that one
#8 x 3/8" sheet metal screw be installed per reflector extension to
prevent it from blowing over.
Allow 6" (15 cm)
minimum clearance
between burner box
and overhead
obstructions for
service.
6" (15 cm) Minimum
Insert screw
here (see note).
Distance "A" Extension
Minimum Maximum Part No. Width
2" (4 cm) 6" (15 cm) 01370408 8" (20 cm)
6" (15 cm) 10" (26 cm) 01370412 12" (30 cm)
10" (26 cm) 14" (37 cm) 01370416 16" (40 cm)
Description Part Number
Reflector Side Extension 01370412
#8 Sheet Metal Screws
Cut relief notches for
supports and hangers.
Decorative Grille Bracket
2" (5 cm)
Minimum
Bracket
Overlap
Description Part Number
Bracket 01363003
In order to maintain reflector shape,
do not fasten brackets together.
Do not fasten bracket to adjoining
reflectors. Maintain same slipjoint
position as reflectors.