Electrolux IG 123020 N - Manual (Page 34)

• Connect to potable water supply only. 19)
Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
are recyclable.
CONTROL PANEL
1
2 3 4 5 6
1 Display
2 Temperature warmer button
3 Temperature colder button
4 OK button
5 Mode button
6 ON/OFF button
It is possible to change predefined sound of
buttons to a loudly one by pressing togeth-
er Mode button and Temperature colder
button for some seconds. Change is rever-
sible.
Display
1 6 3 4 5 2
1 Timer function
2 Drinks Chill function
3 Action Freeze function
4 Child Lock function
5 Alarm indicator
6 Temperature indicator
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. The alarm buzzer could operate after
few seconds.
To reset the alarm refer to "High tem-
perature alarm".
4. If "dEMo" appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if..." paragraph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature refer to
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
19) If a water connection is foreseen.
34 electrolux