Roland FP-3 - Manual (Page 11)

11
Before You Play
■ Turning Off the Power
1. Before switching the power off, turn the volume
all the way down by rotating the [Volume] knob.
Also completely turn down the volume of any connected
audio device and other equipment.
2. Turn off the power to the connected external
equipment.
3. Press the [Power] switch on the back of the unit.
The power is switched off.
fig.00-07
Adjusting the Sound’s
Volume and Brilliance
fig.00-08
1. Use the [Volume] knob to adjust the overall
volume level.
Rotating the knob clockwise increases the volume;
counterclockwise rotation decreases it.
2. Use the [Brilliance] knob to adjust the overall
sound quality.
Rotating the knob clockwise makes the tone brighter;
rotating it counterclockwise makes the sound more
subdued.
Connecting Headphones
Connecting headphones allows you to enjoy playing
anytime, even at night, without concern.
fig.00-09
1. Plug the headphones into the Phones jack at the
front, on the left side of the piano.
Use the [Volume] knob on the FP-3 to adjust the volume
of the headphones.
* Make sure to use stereo headphones.
Some Notes on Using Headphones
• To prevent damage to the cord, handle the headphones
only by the headset or the plug.
• The headphones may be damaged if the volume is too
high when they are plugged in. Lower the volume on the
FP-3 before plugging in the headphones.
• To prevent possible auditory damage, loss of hearing, or
damage to the headphones, the headphones should not
be used at an excessively high volume. Use the
headphones at a moderate volume level.
Rear panel
OFF
Upper position
DC In 9 V
Power
On Off