Raymarine Ray54E - Manual (Page 32)

22 Ray54E VHF Radio
If already on the Secondary Priority (PLUS) Channel, press and release the
16/PLUS key to switch to Priority Channel 16 at high power.
Reprograming the Secondary Priority (PLUS) Channel
1. Press and hold the
16/PLUS key for greater 3 seconds to switch to the
Secondary Priority (PLUS) Channel.
2. Press and hold the
16/PLUS key for greater 3 seconds again to switch to
Reprogram mode. The current Secondary Priority (PLUS) Channel
flashes.
3. Change the channel number with the
CH key.
4. Push the
CH key to ACCEPT the new Secondary Priority (PLUS) selec-
tion. An alert tone sounds to indicate that the Secondary Priority (PLUS)
Channel has been changed.
Note: During the reprogramming of the Secondary Priority (PLUS) Chan-
nel, the PTT and DW/TRI keys are disabled and an error beep sounds if
pressed.