RocketFish RF-BTCMB02 - Manual (Page 14)

14
Pairing the keyboard and mouse
There are three methods for pairing the keyboard and mouse:
• “Automatic pairing in boot mode” on page 14.
• “Pairing by using the WIDCOMM Bluetooth stack” on page 15
Automatic pairing in boot mode
To pair automatically in boot mode:
1 With your computer turned off, plug the USB Bluetooth receiver into an
available USB port.
2 Slide the power switch of the mouse to turn the mouse on.
3 Turn on the computer and use the keyboard to enter the BIOS setup.
4 Use the keyboard and mouse to view the menu and configure the
settings.
2
OFF ON
1