RCA LCD - Manual (Page 18)

Connections and Setup
18 Chapter 1
The Buttons on the Remote Control
Arrows Used to highlight different items in the TV menu and to adjust
the menu controls.
(0-9) Number Buttons Enter channel numbers and time settings
directly through the remote control.
To enter a one-digit channel, enter a zero fi rst. To enter a two-digit
channel, press the two digits. To enter a three-digit channel, press and
hold the “1” button until “1” and two dashes (– –) appear, then add the
second two digits. Example: to tune to channel 123, press and hold 1
until “1– –” appears, release the 1 button and then press 2 and 3.
To enter a digital channel with a sub-channel, enter the main channel,
then press the right arrow to enter the sub-channel and press OK.
ANTENNA Switches between Analog and Digital input channel.
When tuned to an input, press to go back to the most recently used
tuner (Antenna or Digital input).
CC For the Analog input, displays the CC setting and Analog CC
type; for the Digital input, displays the CC setting, Digital CC type, and
Digital CC preset.
CH + or CH - Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.
CLEAR Removes any menu or display from the screen and returns
you to normal viewing.
FAV (Favorite- only available for Analog input) Press to browse the
channels set in your Favorite List. Go to page 31 for more information.
FREEZE While watching TV, freezes the picture. Press OK again to
unfreeze.
GO BACK Returns you to the previous channel.
INFO Brings up the channel banner; press again to clear the screen.
INPUT Accesses the available video input channels (VID, SVID,
CMP1, CMP2, VGA, and HDMI). Press the CH+ or CH- or ANTENNA
button to resume TV viewing.
MENU Displays the menu system. If in a sub-menu, takes you back
to the previous menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to
restore the volume.
OK When in the menu system, displays sub-menus.
ON•OFF Turns the TV on and off.
PRESETS For the Analog input, displays Picture and Sound preset
option. For the Digital input, displays Picture and Sound preset; and
Dig. Ch. Aud. Lang. and CH+/CH- buttons.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time. Press CLEAR to cancel SKIP.
SLEEP Sets the TV to turn off. Each time you press the right arrow
button the clock adds 5 minutes (up to 120 minutes).
SOUND For the Analog input, displays the Tone control menu. For
the Digital input, displays Picture and Sound preset; and Dig. Ch. Aud.
Lang. and CH+/CH- buttons. In VGA mode, switches to the TV's audio.
VOL – or VOL + Decreases or increases the TV’s volume.
ZOOM – or ZOOM + Press left or right to change the size of the
picture on-screen.
1 2 3
4 5 6
7 8 9
ON•OFF
INPUT
MUTE
GO BACK
OK
CLEAR
MENU
PRESETS
CC
INFO
SLEEP
SOUND
FAV
SKIP
ANTENNA
CH+
CH-
VOL+ VOL-
FREEZE
ZOOM- ZOOM+
Note: If you need to replace your
remote, call 1-800-338-0376. A
shipping and handling fee, and the
appropriate sales tax, will be charged
upon ordering. Have your Visa,
MasterCard, or Discover Card ready.
Remote control part number
R130A1
Book 1.indb 18 Book 1.indb 18 12/9/05 5:44:08 PM 12/9/05 5:44:08 PM