RuggedCom RuggedServer RS400 - Manual (Page 8)

www.RuggedCom.com 8 RuggedServer™ RS400
RuggedServer™ RS400
4-Port Serial Device Server with Integrated 4-Port Managed Ethernet Switch
RuggedCom Inc.
30 Whitmore Road
Woodbridge, Ontario, Canada L4L 7Z4
Tel: +1 (905) 856-5288 Fax: +1 (905) 856-1995
Toll Free: +1 (888) 264-0006
Technical Support Center: +1 (866) 922-7975 or +1 (954) 922-7975
© 2008 RuggedCom Inc.
RuggedSwitch is a registered trademark of RuggedCom Inc.
Ethernet is a trademark of the Xerox Corporation.
Patent Pending
All specifications in this document are subject to change without notice.
Rev 2-N
Order Codes
For additional information on our products and
services, please visit our web site at: www.ruggedcom.com
RS400 -__ - __ - _____ - __ - __
PS M E1E2 SP MP
PS: Power Supply
. 24 = 24VDC (9-36 VDC)
. 48 = 48VDC (36-59 VDC)
. HI = 87-264VAC OR 88-300VDC
M: mounting options
. N = No Mounting Hardware
. D = DIN Rail Mounting
. P = Panel Mounting
. R = 19” Rack Mounting
E1, E2: Additional Ethernet Ports 1 & 2 Options (1)
. TX = 10/100BaseTX RJ45
. FL = 10FL Multimode ST, 820nm, 2km
. MJ = 100FX Multimode MTRJ
. MC = 100FX Multimode SC
. MT = 100FX Multimode ST
. ML = 100FX Multimode LC
. T2 = 100FX Singlemode ST, Standard 20km
. L2 = 100FX Singlemode LC, Standard 20km
. L5 = 100FX Singlemode LC, Intermediate Reach 50km
. L9 = 100FX Singlemode LC, Long Reach 90km
. C2 = 100FX Singlemode SC, Standard 20km
. C5 = 100FX Singlemode SC, Intermediate Reach 50km
. C9 = 100FX Singlemode SC, Long Reach 90km
SP (Serial Port Options)
. 2 = 4 x RS232 via DB9
. 4 = 4 x RS485 via 3 POS screw terminals.
. 3D = 4 x RS232/RS422/RS485 via DB9
. 3R = 4 x RS232/RS422/RS485 via RJ45
MP (Modem Port Options)
. Blank = No Modem
. M = V.90 (56Kbps) Modem
ORDER CODE EXAMPLES
RS400-24-D-TXTX-2
RS400-48-P-FLFL-4
RS400-HI-R-MCC2-2
RS400-HI-N-L2L5-4-M
1. Ports 1 & 2 must have the same type of connector
ie. RJ45, MTRJ, ST, SC, LC
Note: All units come standard with 2 10/100Tx RJ45 Ethernet ports
(on Ports 3 & 4)