Ricoh 43-3102 User Manual

Page 5

Advertising
background image

O

perat

ion

5

12'4#6+10

6

740+0)

"

6*'

"+

06'4%1/

"1

0

"

#0&

"1

((

1

#

&,756+0)

"

6*'

"8

1.7/'

To turn on the intercom, rotate

VOLUME

counterclockwise

until it clicks. POWER/BATT LOW lights. Then adjust

VOLUME

to a comfortable listening level.

To turn off the intercom, rotate

VOLUME

clockwise until it

clicks. POWER

/

BATT LOW turns off.

%

#..+0)

"#

016*'4

"+

06'4%1/

"

#

1. Press

CALL

once. TRANSMIT lights. Each intercom

that is on and set to the selected channel and sub-tone
sounds a tone for about 3 seconds.

2. Hold down

TALK

and speak in a normal voice after you

hear the beep. When you finish speaking, release

TALK

and listen for the response.

±

/

10+614+0)

"

#0

"+

06'4%1/

You can set any intercom so it continuously transmits
sounds from the area where it is located to another
intercom. You can monitor only one intercom at a time.

1. Press

LOCK

on the intercom in the area you want to

monitor. TRANSMIT flashes.

2. When you finish monitoring, release the lock by

pressing

TALK

on the intercom in the area you are

monitoring. TRANSMIT turns off.

After pressing

LOCK

on an intercom, you cannot call or talk

to that intercom until you press

TALK

to release the lock.

%

100'%6+0)

"

#0

"#

7&+1

"5

174%'

"

%QPPGEVKPI"C"5VCPFCTF"#WFKQ"5QWTEG

To transmit audio to each intercom, you can connect one
intercom to an optional audio source such as a radio, tape
player, or CD player using an audio cable (not supplied).
Then, when you turn on the audio source, the intercom
where the audio source is connected broadcasts the sound
to the other intercoms.

±

±

"016'"

±

"

Calling Another Intercom

Only one party can talk on a
channel at a time.

TRANSMIT on the intercom you
are using remains lit as long as
you hold down TALK or CALL.

RECEIVE/BUSY lights when
you receive a voice message or
when you are monitoring a
locked intercom. RECEIVE/
BUSY flashes if the channel is
being used.

Connecting a Standard
Audio Source

If your audio source’s cable does
not have the appropriate connector
to attach to the intercom, use an
adapter, available at your local
RadioShack store or at
RadioShack.com.

43-3102.fm Page 5 Monday, May 13, 2002 10:01 AM

Advertising