RIDGID EB44241 - Manual (Page 10)

10
KNOW YOUR OSCILLATING EDGE BELT/
SPINDLE SANDER
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
SANDING BELT
Removes material from wood. Oscillates (3/4 in.) up and down
to sand faster and prevents burning of the workpiece.
BELT TENSION LEVER
Slide lever left to release the sanding belt tension; slide right
to apply belt tension.
TRACKING KNOB
Turning knob counterclockwise causes sanding belt to move
towards the table; turning knob clockwise causes sanding
belt to move away from the table.
SPINDLE KNOB
Loosen knob to remove sanding belt assembly (or sanding
drum) and change to spindle sanding (or belt sanding).
NOTE: Knob has left hand threads. Turn knob clockwise to
loosen and counterclockwise to tighten.
FEATURES
WORK REST
Supports the workpiece on the sanding belt.
THROAT PLATE
Fits around drum to help support workpiece.
SANDING SLEEVE/DRUM
Removes material from wood. Oscillates up and down to
sand faster and prevents burning the workpiece.
TABLE LOCK KNOB
Loosening knob allows the front table to be tilted for bevel
sanding.
DUST ExHAUST PORT
-1/ in. opening for wet/dry vac hook-up.
TABLE INSERT/SANDING BELT STORAGE
Holds table insert or sanding belt when not being used.
TABLE INSERT
Helps to support workpiece when drum sanding.
WORKTABLE
Equipped with a sturdy, worktable that provides a stable surface
when using either the disc sanding or the belt sanding feature.
TOOLS NEEDED
Combination
sQuare
straiGht edGe
The following tools (not included) are needed for making adjustments to your tool:
Fig. 3