Radio Shack HTX-200 - Manual (Page 20)

20
(T.SET) Change (decrease) the
frequency by the value
set for CS (see the first
menu option on Page
16). Accesses the Tone
Set Option menu
and settings.
MO (REV) Press to override
squelch. Press and
hold to cycle through
rC , tC , rPt , and CS
settings.
Reverse the
repeater offset.
(BEEP) Turn on the display’s
backlight for 4 seconds. Enable/disable the
key tone.
appears when the
key tone is
enabled.
MR (MW) Enter memory setting
mode.
MR and the last
used memory location
appear.
In memory mode,
starts the display
flashing. Then use
or to
access a fre-
quency to store in
a memory location.
SC (RPT) Starts and stops scan-
ning. Hold down and
power on to access
expanded band cover-
age
(142–150 MHz). Set the radio to
simplex or duplex
mode when in
VCO mode. Set
the repeater offset
for a memory loca-
tion when in mem-
ory mode.
Key/Control Use it to:
Use with the
FUNC + Key to:
19-1102RPO.fm Page 20 Friday, June 25, 1999 11:17 AM