Adjusting the volume, Troubleshooting when using the facsimile function – Ricoh 8030e User Manual
Page 33
25
3. Troubleshooting When
Using the Facsimile Function
This chapter describes likely causes of and possible solutions for facsimile func-
tion problems.
Adjusting the Volume
This section describes how to adjust the volume.
You can change the volume of the following sounds that the machine makes.
❖ On Hook Mode
Heard when the {On Hook Dial} key is pressed.
❖ At Transmission
Heard when the machine sends a document.
❖ At Reception
Heard when the machine receives a document.
❖ At Dialing
Heard after pressing the {Start} key, until the line connects to the destination.
❖ At Printing
Heard when a received document is printed. See “Print Completion Beep”,
Facsimile Reference.
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Check that the [Gen. Settings/ Adjust] display appears.