Reebok Fitness RBEX69740 - Manual (Page 4)

4
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
Assembly requires your own adjustable wrench and phillips screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers
to the quantity used in assembly.
Note: Some small parts may have been pre-assembled for shipping. If a
part is not in the parts bag, check to see if it has been pre-assembled.
M10 x 92mm Carriage Bolt (77)–2
M10 Nylon
Locknut (63)–4
M10 x 105mm Carriage Bolt (74)–2
M8 Split
Washer (65)–4
M8 Flat
Washer (18)–4
M8 Nylon
Locknut (56)–4
M6 Washer
(25)–6
M8 x 19mm Button
Bolt (43)–4
M4 x 16mm
Screw (21)–4
M6 x 16mm Screw
(70)–2
M4 x 25mm
Screw (66)–2
M6 x 38mm Hex
Screw (68)–4
M6 x 16mm Hex
Screw (29)–4
M4 x 22mm
Screw (75)–2
M8 x 25mm Button
Screw (27)–4
A SSEMBLY
1. Identify the Front Stabilizer (2), which has Wheels
(59) attached to one side. Attach the Front Stabilizer
to the front of the Frame (1) with two M10 x 92mm
Carriage Bolts (77) and two M10 Nylon Locknuts
(63).
2
59
77
1
63
1