Playing a tape – Radio Shack SCP-107 User Manual
Page 25
25
Using the Tape Player
Note: The cassette player comes with a
block of foam to protect the cassette play-
er’s playback head during shipment. Re-
move the foam before loading a tape.
1. Take up any slack in the tape by turn-
ing the cassette’s hub with a pencil.
Do not touch the exposed tape.
2. Slide
OPEN
in the direction of the
arrow and open the compartment
door by pulling it toward you.
3. Insert a cassette into the door’s tape
guides with the cassette’s open edge
facing up and the desired side visible
through the window.
4. Close
the
cassette
compartment
door.
PLAYING A TAPE
1. If the radio is on, turn it off by repeat-
edly pressing
RADIO ON/OFF BAND
until the display is turned off.
2. Slide
NOR HI/MTL
to
NOR
for Type I
(normal bias) cassette tapes or to
HI/
MTL
for Type II (high bias) and Type
IV (metal) tapes.
14-1250.DS.fm Page 25 Tuesday, May 16, 2000 2:32 PM