Radio Shack 15-1867 User Manual

0kijv".kijv"1"+pfqqt"68"#pvgppc

Advertising
background image

©

2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

15-1867

OWNER’S MANUAL — Please read before using this equipment.

Thank you for purchasing the RadioShack Night Light/
Indoor TV Antenna. It can receive both VHF and UHF
channels, and consists of loop and telescoping antenna
elements. A 6-foot coaxial cable with a gold plated male F-
connector is attached to the antenna for TV connection.

219'4+0)"6*'"#06'00#

Your antenna uses an optional 4.5V DC, 100mA adapter or
three size C batteries (not supplied, available at your local
RadioShack store) for illuminating the night light indicator.
After connecting to power, press

LIGHT

to turn the light on or

off while in darkness.

.#

.#

.#

.#

±

9

+6*

"

#0

"#

&#26'4

Plug a 4.5V DC, 100mA adapter into the antenna’s

DC 4.5V

jack. Plug the adapter into an AC outlet.

9

+6*

"$

#66'4+'5

1. Use a screwdriver to loosen the screw from the battery

compartment cover, and remove the cover.

#

"+/2146#06"

#

If an icon appears at the end of a
paragraph, go to the box on that
page with the corresponding icon
for pertinent information.

— Warning

#

— Important

.

.

.

.

— Caution

°

°

°

°

— Hint

±

— Note

VHF Telescope Rod Antennas — Swivel up
to 180 degrees for the best VHF reception.

UHF Turntable Knob
Adjust knobs to
receive UHF stations in
most metropolitan
areas.

UHF Turntable
Knob

LIGHT — After connecting to
power, press it to turn the night
light on or off when in darkness.

TUNING — Adjust to 12
different settings to fine tune
VHF channels.

.

"%#76+10"

.

If you do not plan to use the
antenna for several months,
remove the batteries. Batteries can
leak chemicals that can destroy
electronic parts.

±

"016'"

±

"

The power from the batteries or
adapter is only for the night light
LED. The antenna will work
without the power for the LED.

The antenna has a light sensor
circuit that automatically lights if
you are using an adapter or
have batteries installed. If you
press LIGHT while in a dark
room, the light turns on. When
the surroundings are bright, the
light will not turn on when you
press LIGHT.

0KIJV".KIJV"1"+PFQQT"68"#PVGPPC

Advertising