Renesas M34502T-MCU - Manual (Page 16)

( 14 / 38 )
4.2 Specifications
Table 4.1 lists specifications of the M34502T-MCU.
Table 4.1 M34502T-MCU specifications
*1 The M34502T-MCU has an oscillator circuit board OSC-2 (for 4.19 MHz) that is incorporated
when shipped from the factory. In addition, it comes with an oscillator circuit board OSC-2, with
only a connector J1 mounted.
And the M34502T-MCU operates in the default mode (instruction-clock: f (X
IN
)/8) immediately
after a RESET is released.
4501 Group
4502 Group
4506 Group
4507 Group
4580 Group
M34502E4FP (mounted)
System clock: 4.19 MHz (with OSC-2 for 4.19 MHz)* 1
233 (D) x 135 (W) x 1.6 (H) mm
5 to 35 ° C (no dew)
• M34502T-MCU
• 60-wire half-pitch cable
• 26-wire normal-pitch cable
• External trigger cable
• PCA4029
• OSC-2 (for changing frequencies)
• M34501T-PTC
Applicable MCUs
Evaluation MCU
Maximum operating
clock frequency
5 V
Default mode
Low-speed mode
Medium-speed mode
High-speed mode
Default mode
Low-speed mode
Medium-speed mode
High-speed mode
3 V or 5 V
Supplied by the PC4504's internal power supply (+5 V, +12 V)
Port
D
0
- D
5
P0
0
- P0
3
P1
0
- P1
3
P2
0
, P2
1
Direction
Input/output
Input/output
Input/output
Input/output
Device used Output type
N-channel
open drain
-
Target system voltage
Power supply
Port emulation
Board dimensions
Operating temperature
Product configuration
3 V
3.0 MHz
1.5 MHz
4.4 MHz
4.4 MHz
Input: 74HC4050
Output: 74LS06
Input/output: 74HC4066