Ricoh Caplio RR30 - Manual (Page 98)

98
Chapter 1 / Section 6 Changing Camera Settings
To make changes to the beep sound, follow the
steps below.
Turn the Mode Dial to (Setup Mode).
The Setup Screen appears.
Press the button to select [BEEP
SOUND].
Press the buttons to select the desired
setting.
This setting will be used until you change it.
ON (Make sound) ⁄ Set at purchase
OFF (Silent)
Possible Settings
Buzz at Recording (BEEP SOUND)
When you shoot an image, it is immediately recorded to internal memory or SD Memory Card. When
recording, your camera makes a beep sound to let you know it is recording.
You can set the camera so it does not make this sound.