Radio Shack XL-260 - Manual (Page 13)

13 Connecting Inputs
Connecting Four Speakers
1. Use a screwdriver to connect the front
left speaker’s positive (+) wire to the
amplifier’s
CH1 (+) terminal.
2. Use a screwdriver to connect the front
left speaker’s negative (–) wire to the
amplifier’s
CH1 (–) terminal.
3. Repeat Steps 1–2 to connect the front
right speaker’s positive (+) and negative
(–) wires to the amplifier’s CH2 (+) and
CH2 (–) terminals.
4. Repeat Steps 1–3 to connect the rear
left and rear right speaker’s positive (+)
and negative (–) wires to the amplifier’s
CH3 (+) , CH3 (–) , CH4 (+) , and CH4 (–) ter-
minals.
Connecting Two Speakers (Unbridged Connection)
If you do not have high-power speakers, use
this connection. This connection produces
65 watts per channel.
1. Use a screwdriver to connect the left
speaker’s positive (+) wire to the ampli-
fier’s
CH3 (+) terminal.
2. Use a screwdriver to connect the left
speaker’s negative (–) wire to the ampli-
fier’s
CH3 (–) terminal.
3. Repeat Steps 1–2 to connect the right
speaker’s positive (+) and negative (–)
wires to the amplifier’s
CH4 (+) and CH4
(–) terminals.
CH1 Front
Left Speaker CH2 Front
Right Speaker CH3 Rear
Left Speaker CH4 Rear
Right Speaker
Right Speaker Left Speaker
12-2017.fm Page 13 Tuesday, May 9, 2000 10:02 AM