RedMax PORTABLE GAS DRILL EDG2300 - Manual (Page 16)

16 
Storage
■ BEFORE LONG-TERM STORAGE
• Drain fuel tank and run engine out until all
fuel in the carburetor is used up.
• Remove the spark plug and drop a
spoonful 2 cycle oil into the cylinder.
Crank the engine several times and
replace the plug.
Pull starter until compression is felt.
• Brush off dirt from the drill surface and
apply rust protective oil.
• Store the machine in a dry, dust-free
place.
Disposal
• When disposing your machine, fuel or oil
for the machine, be sure to allow your
local regulations.