Roland RM-700 - Manual (Page 114)

115
Using the Practice Functions
When you’re playing along with a song, you can listen to the tempo before you start playing by adding a count-in.
This audible count before the song playback is called a “Count In.”
1. Press the [Count] button so its indicator is lit.
The “Count” screen appears.
* Touch to switch pages.
2. Touch <Count Mode> to set this to “Count In” or “Count In/Down.”
With this setting, two measures count down before the song playback starts.
Cancelling the Count In
1. Press the [Count] button so its indicator is turned off.
By pressing [Exit] instead of the [Count] button, you can close the Count settings screen without cancelling the count.
• You can have a count sound be played before the song starts playing back by holding down the [ (Prev)] button while you
press the [ (Play/Stop)] button.The status of the Count settings won’t be affected by your use of this procedure.
• For more about other settings on the Count settings screen, refer to “Changing the Settings for the Count” (p. 171).
Match the Tempo Before You Begin Playing (Count In)
RM-700_e.book 115 ページ ２００９年３月１８日 水曜日 午前１１時５分