Specifications – RedMax Power Auger AG2300 User Manual
Page 14
Model Name
AG2300
Engine
Displacement cu.in(cc) ........................................................................................1.37 (22.5)
Maximum power HP ....................................................................................1.2 at 7500 rpm
Carburetor ............................................................................................Diaphragm (Walbro)
ignition system ...........................................................................................Electronic (T.C.I)
Spark plug ...............................................................................................Champion RCJ6Y
Starter .............................................................................................................Recoil starter
Fuel .............................................................................2 cycle oil premixed gasoline (32:1 )
Fuel tank capacity fl.oz(lit) ...............................................................................................20 (0.6)
Transmission ..................................................................Centrifugal clutch, spur gear reduction
Gear box lubricant ..................................................................................................Grease (L#0)
Reduction ratio .....................................................................................................................35:1
Grip span in (mm) ..........................................................................................................20 (505)
Over all dimensions
Length in (mm) .....................................................................................................24.8 (630)
Width in (mm) .........................................................................................................9.8 (250)
Height w/o drill in (mm) ........................................................................................13.4 (340)
Dry weight w/o drill Ids (kg) ..........................................................................................10.6 (4.8)
Adaptable drill size
Diameter in (mm) ..................................................................................0.8 to 2.4 (20 to 60)
Specifications
Specifications are subject to change without notice.
14