For windows® vista – Rosewill RC218 User Manual
Page 8
4 channel PCIe x 4 to SATA II Card
RC218
User Manual
8
(Recommended), and click Next.
2.
If the Hardware Installation window pops up, click Continue
Anyway, then Finish. Our driver has been thoroughly tested for
stability and compatibility.
3.
Click Finish.
For Windows® Vista
For New Installation
1.
Follow Microsoft’s Windows installation procedure.
2.
At the Windows Setup screen, press Load Driver to install the
driver.
3.
Insert the floppy disk, please select Marvell Serial ATA Gen 2
PCI Express Adapter (A:\i386\mvsata.inf), then press Next.
(Change A:\ to match your floppy drive letter)
4.
Follow the on-screen instructions to complete the Windows
installation.
For An Existing Installation
1.
At Found New Hardware Wizard, select Locate and install driver
software (recommended).
2.
Please insert the CD driver into your CD-ROM Drive, click Next.
3.
If the system prompts the user informing the drivers are not signed,
select the option Install this driver software anyway.
4.
Click Close to complete the installation.