Roberts Radio RDK-2 - Manual (Page 22)

21
Manual tuning - FM
1. Touch the On/Standby button to switch on your radio.
2. Touch the Band button to select the FM band.
3. Touch the Tuning Up/Down buttons to tune to a station. The frequency
will change in steps of 50 kHz.
4. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
5. Set the Volume to the desired settings.
6. To switch off your radio touch the On/Standby button.
Presetting stations - FM
You may store your preferred FM radio stations to the preset station
memories (1 to 5). The procedure for setting presets and using them to
tune stations is the same for FM and DAB modes, and is described on
page 11. Note that the radio stores FM and DAB presets separately and
so there are fi ve of each.
2
2
5
5
3
3