Runco CINEWIDE VX-6000D - Manual (Page 33)

Runco VX-6000d Installation/Operation Manual 17
PRE
L
IMINAR
Y
3.1
Remote Control
Battery Installation To install batteries in the remote control:
1. Remove the battery cover from the back of the remote control.
2. Insert the batteries included with the remote control. Ensure that the polarities
correctly match the
and markings inside the battery compartment.
3. Replace the battery cover.
3. Installation
1. Do not mix an old battery with a new one or different types of
batteries.
2. If you will not use the remote control for a long time, remove the
batteries to avoid damage from battery leakage.
Setup Remote Standard DHD Remote
Note