Roland ATELIER 5100001499 - Manual (Page 98)

96
Record and Playback Your Performance
You can connect a commercially available CD drive to the
ATELIER and use it to play music CDs. This lets you perform or
sing along with the backing of a music CD.
You can’t copy music CD songs to “Favorites.”
It will take a certain amount of time until a music CD can be
selected.
1. Connect a commercially available CD drive to
the External Memory connector, and insert the
music CD into the CD drive.
2. Press the [Song] button (confirm that its
indicator is lit).
The Song Select screen appears.
3. Press the [Media] button to select “CD.”
4. Press the Value [-] [+] buttons to select the
song you want to play.
5. Press the [Play/Stop] button to start playback.
6. To stop playback, press the [Play/Stop]
button.
You can press [Bwd] button or [Fwd] button to rewind or
fast-forward the playback.
You can minimize the vocal sounds of a commercially
available music CD, and sing the vocal part yourself. This is a
convenient way to enjoy karaoke or practice soloing with a
favorite music CD.
For some songs, the vocal sound may not be eliminated
completely.
1. Connect a commercially available CD drive to
the External Memory connector.
2. Insert the music CD you want to use into the
CD drive, and select the song you want to sing
(p. 96).
3. Press the [Utility] button.
4. Press the Menu [ ] [ ] buttons a number
of times to select “VIMA TUNES.”
5. Press the [Rec] button.
6. Press the Menu [ ] [ ] buttons a number
of times to select “Melody.”
fig.02-10.eps
7. Press the Value [-] [+] buttons to select “MUTE/
C.CANCEL.“
The Center Cancel function is active.
8. Press the [Play/Stop] button to start playing
back the song.
When you play back the song, the sound of the melody
or vocal will be minimized.
This lets you perform the melody portion yourself.
Listening to Songs from Music
CD
NOTE
NOTE
Enjoying Karaoke with a Music CD
(Center Cancel)
NOTE
AT-75_e.book 96 ページ ２００８年８月２１日 木曜日 午前１０時９分