Features, Assembly – Ryobi HG500 User Manual
Page 9
8
9
FEATURES
KNOW YOUR HEAT GUN
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ON/OFF SWITCH
Your heat gun has a conveniently located on/off slide
switch.
NOSE CONE
The nose cone on your heat gun can be removed for work
in confined spaces.
SUPPORT STAND
Your heat gun has a built-in support stand for ease of use
and convenient cool down.
TEMPERATURE ADJUST DIAL
The temperature of your heat gun can be adjusted from 200ºF
to 1100ºF by rotating the temperature adjustment dial.
LED TEMPERATURE DISPLAY
LED lights located on top of the heat gun display the desired
temperature as indicated by the position of the temperature
adjustment dial.
POWER CORD
An extra-long 10-foot power cord gives you more freedom
of movement and placement flexibility when working with
your heat gun.
HANGER
A hanger is located in the support stand of your heat gun.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
n
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Heat Gun
Scraper Nozzle
Tube Bender Nozzle
Concentrator Nozzle
Handheld Scraper
Case
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.