Rosewill RNX-G300EXLX - Manual (Page 79)

Wireless Adapter RNX-G300EX/LX User Manual
- 78 -
AUTH. \ ENCRY. SETTING - WEP/TKIP/AES
Auth. \ Encry. Setting, shown as Figure 3-1.
Figure 3-1 Auth. \ Encry. Setting
A. Authentication Type : There are 7 type of authentication modes supported by RaUI. They are open, Shared, LEAP, WPA
and WPA-PSK, WPA2 and WPA2-PSK.
B. Encryption Type : For open and shared authentication mode, the selection of encryption type are None and WEP. For
WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the encryption type supports both TKIP and AES.
C. 8021X : This is introduced in the topic of Section 3-2.
D. WPA Pre-shared Key : This is the shared secret between AP and STA. For WPA-PSK and WPA2-PSK authentication
mode, this field must be filled with character longer than 8 and less than 32 length.
E. WEP Key : Only valid when using WEP encryption algorithm. The key must matched
AP's key. There are several formats to enter the keys.
E-1. Hexadecimal - 40bits : 10 Hex characters.
E-2. Hexadecimal - 128bits : 32Hex characters.
E-3. ASCII - 40bits : 5 ASCII characters.
E-4. ASCII - 128bits : 13 ASCII characters.
**Powered by Meetinghouse.