Runco CL-610LT - Manual (Page 13)

13 Runco CL-610 Owner’s Operating Manual
1. FOCUS RING
Adjust the focus of the image
- Rotate the focus ring right or left to
focus the image.
2. ZOOM RING
Adjust the size of the image
- Rotate right to enlarge the image.
- Rotate left to reduce the image.
3. LAMP LED
Indicates the status of the lamp
- Red when the lamp has exceeded
its usage life or developed a
problem. Please contact your Runco
Dealer for assistance.
- Flashing Red when the fans are
not working or the lamp cover is
open. Please contact your Runco
Dealer for assistance.
4. POWER LED
Indicates the status of the power
- Orange when the AC power cord
is plugged into a wall outlet (standby
mode). Once in standby mode, you
can turn on the projector by
pressing the ON button on the
remote control.
- Green when the power is turned
on (operational mode).
- Flashing Orange for the first 45
seconds after power-up indicating
that the lamp is warming up.
- Flashing Green for 110 seconds
after the projector was powered off
indicating that the lamp is cooling
down.
5. TEMP LED
Indicates the status of the fans and
internal temperature
- Red when the internal temperature
is too high. Please contact your
Runco Dealer for assistance.
- Flashing Red when the fans are
not working or the lamp cover is
open. Please contact your Runco
Dealer for assistance.
6. TOP IR SENSOR
Controls and Functions
Control Panel