Rosen Entertainment Systems viocecom 1000 - Manual (Page 12)

Operating the System
"Store Emergency Number"
VoiceCom 1000™
DO NOT ATTEMPT TO PERFORM THE FOLLOWING
PROCEDURE WHILE DRIVING THE CAR! STOP THE CAR
AND THE ENGINE AND PARK IN A SECURE PLACE
BEFORE ENTERING INTO THE VOICE CONTROL
PROGRAMMING DIALOG!
You can store a random number in a reserved location within the VoiceCom
1000™ by saying "Store Emergency Number. The system responds to this
command with "THE NUMBER PLEASE" and you enter the number in the
same way as described in the command "Dial Number" above. The system will
acknowledge the number and you must say "Store," and the system responds
with "THE NUMBER IS STORED." Should you have already previously stored
an emergency number, i.e. '911', the system responds with "A NUMBER IS
ALREADY STORED, REPLACE NINE, and ONE, ONE?” If you say, "Yes," you
are prompted with the phrase "THE NUMBER PLEASE" to enter the new
number in the same way as described in the command "Dial Number" above.
The system will acknowledge the number and you must say "Store," and the
system responds with "THE NUMBER IS STORED." In case you want to keep
the emergency number already stored, your response to the question
"REPLACE NINE, ONE, ONE?" should be "No” and the system exists the
dialog with "CANCEL." Once you have programmed the emergency number,
can initiate a call to this number simply by pressing the left and right keys
together. This is to avoid calling it accidentally. The system acknowledges the
emergency call with "THE EMERGENCY NUMBER IS DIALED."
Operating the System
with a Bluetooth
®
enabled phone
To be able to phone with the system, a compatible Bluetooth
®
phone has to be
paired with and connected to the VoiceCom 1000™. In the following
sections you will find out what else you have to do and what else you need to
know about Bluetooth
®
.
-12-